200
Default level
1: Monitor level
Parameters
all: Specifies all VPLS information in the BGP routing table.
group group-name: Specifies a peer group by its name, which is a string of 1 to 47 characters.
ip-address: Specifies the IP address of the peer.
verbose: Displays detailed information.
route-distinguisher route-distinguisher: Specifies the RD, which is a string of 3 to 21 characters in the
format of nn:nn or IP_address:nn.
site-id site-id: Specifies the site in the VPLS instance by its ID, whose value ranges from 0 to 32.
label-offset label-offset: Specifies the label offset value, which is ranging from 0 to 65,535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all VPLS information in the BGP routing table.
<Sysname> display bgp vpls all
BGP Local Router ID : 2.2.2.9, Local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
BGP.VPLS: 1 destination
**Route Distinguisher: 100:1
SITE ID LB Offset LB Size LB Base Nexthop LocPref
1 0 10 131346 3.3.3.9 100
Table 75 Command output
Field Description
BGP Local Router ID Router ID of the local BGP router
Local AS number Number of the local AS
Origin codes
Route origin codes. Valid values include:
i—IGP (learned from within the AS)
e—EGP (learned through EGP)
?—incomplete (learned in any other way)
BGP.VPLS Number of BGP VPLS
SITE ID ID of a site in the VPLS instance
LB Offset Label offset value
LB Size Size of the label block
To Next Page
Loading...
Need help?
General
