HP 5800 Series User Manual

71
View
Any view
Default level
1: Monitor level
Parameters
incoming-interface interface-type interface-number: Specifies LSPs using the given interface as the
incoming interface. The interface-type interface-number combination specifies an interface by its type and
number.
outgoing-interface interface-type interface-number: Specifies LSPs using the given interface as the
outgoing interface. The interface-type interface-number combination specifies an interface by its type and
number.
in-label in-label-value: Specifies LSPs using the given label as the incoming label. The value of the
incoming label ranges 0 to 1,048,575.
out-label out-label-value: Specifies LSPs using the given label as the outgoing label. The value of the
outgoing label ranges 0 to 1,048,575.
asbr: Specifies LSPs established by ASBRs.
vpn-instance vpn-instance-name: Specifies LSPs of a VPN instance. vpn-instance-name is the VPN
instance name, which is a case-sensitive string of 1 to 31 characters.
protocol: Specifies LSPs established by a given protocol.
bgp: Specifies BGP LSPs.
bgp-ipv6: Specifies IPv6 BGP LSPs, or, BGP4+ LSPs.
crldp: Specifies CR-LSPs established by CR-LDP. This is not supported by HP 5800 series now.
ldp: Specifies LDP LSPs.
rsvp-te: Specifies CR-LSPs established by RSVP-TE.
static: Specifies static LSPs.
static-cr: Specifies static CR-LSPs.
egress: Specifies LSPs taking the current LSR as the egress.
ingress: Specifies LSPs taking the current LSR as the ingress.
transit: Specifies LSPs taking the current LSR as a transit LSR.
exclude: Specifies LSPs other than the one for the given FEC.
include: Specifies the LSP for the given FEC.
dest-addr mask-length: Specifies a FEC by its destination address and the length of the mask. The mask
length is ranging from 0 to 32.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)