HP 5800 Series User Manual

72
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display information about all LSPs.
<Sysname> display mpls lsp
-----------------------------------------------------------------------
LSP Information: L3VPN LSP
-----------------------------------------------------------------------
FEC In/Out Label In/Out IF Route-Distinguisher Vrf Name
100.1.1.1 1025/1024 -/- 100:1 ASBRLSP
-----------------------------------------------------------------------
LSP Information: LDP LSP
-----------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
100.10.1.0/24 3/NULL -/-
100.10.1.0/24 3/NULL -/-
168.1.0.0/16 3/NULL -/-
172.17.0.0/16 3/NULL -/-
Table 31 Command output
Field Description
FEC
Forwarding equivalence class, in either of the
following two forms:
• IP address/mask: Assigning labels based on
destination addresses.
• IP address: Assigning labels based on the
addresses of the next hops.
# Display detailed information about all LSPs.
<Sysname> display mpls lsp verbose
----------------------------------------------------------------
LSP Information: BGP LSP
----------------------------------------------------------------
No. : 4
VrfIndex : vpn1
FEC : 56.10.10.2
Nexthop : -------
In-Label : 1024
Out-Label : NULL
In-Interface : ----------
Out-Interface : ----------
LspIndex : 5121
Tunnel ID : 0x0
LsrType : Egress
Outgoing Tunnel ID : 0x0

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)