94
Default level
2: System level
Parameters
ip-address: IPv4 address of the RADIUS client.
key string: Shared key for communication with the RADIUS client, a case-sensitive string of 1 to 64
characters.
all: Specifies all RADIUS clients.
Description
Use the radius-server client-ip command to specify a RADIUS client.
Use the undo radius-server client-ip command to delete the specified RADIUS client or all RADIUS clients.
The IP address of the RADIUS client specified on the RADIUS server must be consistent with the source IP
address of RADIUS packets configured on the RADIUS client,.
The shared key specified on the RADIUS serer must be consistent with that configured on the RADIUS
client.
To specify multiple RADIUS clients, execute this command repeatedly. The maximum number of RADIUS
clients that can be configured depends on the storage space.
Examples
# Specify RADIUS client 10.1.1.1 and the shared key as 1234.
<Sysname> system-view
[Sysname] radius-server client-ip 10.1.1.1 key 1234
radius-server user
Syntax
radius-server user user-name
undo radius-server user { user-name | all }
View
System view
Default level
2: System level
Parameters
user-name: user-name: RADIUS user name, a case-sensitive string of 1 to 64 characters that can contain
the domain name. It cannot contain question mark (?),less-than sign (<), greater-than sign (>), backward
slash (\), quotation mark (―), percent sign (%), apostrophe ('), ampersand (&), number sign (#), or
spaces and cannot be ―a‖, ―al‖, or ―all‖.
all: Removes all RADIUS users.
Description
Use the radius-server user command to create a RADIUS user and enter RADIUS-server user view.
Use the undo radius-server user command to delete the specified RADIUS user or all RADIUS users.
By default, no RADIUS user exists.
To Next Page
Loading...
Need help?
General
