302
ssl client-policy
Syntax
ssl client-policy policy-name
undo ssl client-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: Specifies an SSL client policy name, a case-insensitive string of 1 to 16 characters, which
cannot be ―a‖, ―al‖, or ―all‖.
all: Specifies all SSL client policies.
Description
Use the ssl client-policy command to create an SSL policy and enter its view.
Use the undo ssl client-policy command to delete SSL client policies.
Related commands: display ssl client-policy.
Examples
# Create SSL client policy policy1 and enter its view.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1]
ssl server-policy
Syntax
ssl server-policy policy-name
undo ssl server-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: Specifies an SSL server policy name, a case-insensitive string of 1 to 16 characters, which
cannot be ―a‖, ―al‖, or ―all‖.
all: Specifies all SSL server policies.
Description
Use the ssl server-policy command to create an SSL server policy and enter its view.
Use the undo ssl server-policy command to delete SSL server policies.
To Next Page
Loading...
Need help?
General
