244
display ipsec policy
Syntax
display ipsec policy [ brief | name policy-name [ seq-number ] ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
brief: Displays brief information about all IPsec policies.
name: Displays detailed information about a specific IPsec policy or IPsec policy group.
policy-name: Name of the IPsec policy, a string of 1 to 15 characters.
seq-number: Sequence number of the IPsec policy, in the range 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipsec policy command to display information about IPsec policies.
If you do not specify any keywords or parameters, the command displays detailed information about all
IPsec policies.
If you specify the name policy-name combination but leave the seq-number argument, the command
displays detailed information about the specified IPsec policy group.
Related commands: ipsec policy.
Examples
# Display brief information about all IPsec policies.
<Sysname> display ipsec policy brief
IPsec-Policy-Name Mode acl ike-peer name Mapped Template
------------------------------------------------------------------------
bbbbbbbbbbbbbbb-1 template aaaaaaaaaaaaaaa
man-1 manual 3400
IPsec-Policy-Name Mode acl Local-Address Remote-Address
------------------------------------------------------------------------
man-1 manual 3400 3.3.3.1 3.3.3.2
To Next Page
Loading...
Need help?
General
