9
Description
Use the authentication login command to configure the authentication method for login users (users
logging in through the console or AUX port or accessing through Telnet or FTP).
Use the undo authentication login command to restore the default.
By default, the default authentication method for the ISP domain is used for login users.
The specified RADIUS or HWTACACS scheme must have been configured.
Related commands: local-user, authentication default, hwtacacs scheme, and radius scheme.
Examples
# Configure ISP domain test to use local authentication for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login local
# Configure ISP domain test to use RADIUS authentication scheme rd for login users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login radius-scheme rd local
authentication portal
Syntax
authentication portal { local | none | radius-scheme radius-scheme-name [ local ] }
undo authentication portal
View
ISP domain view
Default level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the authentication portal command to configure the authentication method for portal users.
Use the undo authentication portal command to restore the default.
By default, the default authentication method for the ISP domain is used for portal users.
The specified RADIUS scheme must have been configured.
Related commands: authentication default and radius scheme.
Examples
# Configure ISP domain test to use local authentication for portal users.
To Next Page
Loading...
Need help?
General
