6
NOTE:
After you configure the accounting optional command, the setting by the access-limit command in local
user view is not effective.
Examples
# Enable the accounting optional feature for users in domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting optional
accounting portal
Syntax
accounting portal { local | none | radius-scheme radius-scheme-name [ local ] }
undo accounting portal
View
ISP domain view
Default level
2: System level
Parameters
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the accounting portal command to configure the accounting method for portal users.
Use the undo accounting portal command to restore the default.
By default, the default accounting method for the ISP domain is used for portal users.
The specified RADIUS scheme must have been configured.
Related commands: local-user, accounting default, and radius scheme.
Examples
# Configure ISP domain test to use local accounting for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal local
# Configure ISP domain test to use RADIUS scheme rd for accounting on portal users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal radius-scheme rd local
To Next Page
Loading...
Need help?
General
