EasyManuals Logo

HP A5500 EI User Manual

HP A5500 EI
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
62
NOTE:
The shared key configured by this command takes precedence over that configured by the key
accounting
string
command.
Related commands: key, radius scheme, state, and vpn-instance (RADIUS scheme view).
Examples
# Specify the secondary accounting server and UDP port number for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
# Specify two secondary accounting servers for RADIUS scheme radius2, with the server IP addresses of
10.110.1.1 and 10.110.1.2, and the UDP port number of 1813.
<Sysname> system-view
[Sysname] radius scheme radius2
[Sysname-radius-radius2] secondary accounting 10.110.1.1 1813
[Sysname-radius-radius2] secondary accounting 10.110.1.2 1813
secondary authentication (RADIUS scheme view)
Syntax
secondary authentication { ipv4-address [ port-number | key string | vpn-instance vpn-instance-name ] *
| ipv6 ipv6-address [ port-number | key string ] * }
undo secondary authentication [ ipv4-address | ipv6 ipv6-address ]
View
RADIUS scheme view
Default level
2: System level
Parameters
ipv4-address: IPv4 address of the secondary authentication/authorization server, in dotted decimal
notation. The default is 0.0.0.0.
ipv6 ipv6-address: IPv6 address of the secondary authentication/authorization server.
port-number: UDP port number of the secondary authentication/authorization server, which ranges from 1
to 65535 and defaults to 1812.
key string: Specifies the shared key for exchanging authentication/authorization packets with the
secondary RADIUS authentication/authorization server. A shared key is a case-sensitive string of 1 to 64
characters.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the secondary RADIUS
authentication/authorization server belongs to, where vpn-instance-name is a case-sensitive string of 1 to
31 characters. If the server is on the public network, do not specify this keyword and argument
combination.
Description
Use the secondary authentication command to specify secondary RADIUS authentication/authorization
servers for a RADIUS scheme.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5500 EI and is the answer not in the manual?

HP A5500 EI Specifications

General IconGeneral
BrandHP
ModelA5500 EI
CategoryNetwork Router
LanguageEnglish

Related product manuals