HP A5500 EI User Manual

298
Session Cachesize: 500
Client-verify: disabled
Table 46 Output description
Field
Description
SSL Server Policy
SSL server policy name
PKI Domain
PKI domain used by the SSL server policy
Ciphersuite
Cipher suites supported by the SSL server policy
Handshake Timeout
Handshake timeout time of the SSL server policy, in seconds
Close-mode
Close mode of the SSL server policy, which can be:
 wait disabled: In this mode, the server sends a close-notify alert message to the
client and then closes the connection immediately without waiting for the close-
notify alert message of the client.
 wait enabled: In this mode, the server sends a close-notify alert message to the
client and then waits for the close-notify alert message of the client. Only after
receiving the expected message, does the server close the connection.
Session Timeout
Session timeout time of the SSL server policy, in seconds
Session Cachesize
Maximum number of buffered sessions of the SSL server policy
Client-verify
Whether client authentication is enabled for the SSL server policy
handshake timeout
Syntax
handshake timeout time
undo handshake timeout
View
SSL server policy view
Default level
2: System level
Parameters
time: Handshake timeout time in seconds, in the range 180 to 7200.
Description
Use the handshake timeout command to set the handshake timeout time for an SSL server policy.
Use the undo handshake timeout command to restore the default.
By default, the handshake timeout time is 3600 seconds.
If the SSL server does not receive any packet from the SSL client before the handshake timeout time
expires, the SSL server will terminate the handshake process.
Related commands: display ssl server-policy.
Examples
# Set the handshake timeout time of SSL server policy policy1 to 3000 seconds.

HP A5500 EI Specifications

General

Brand	HP
Model	A5500 EI
Category	Network Router
Language	English