33
local-user
Syntax
local-user user-name
undo local-user { user-name | all [ service-type { ftp | lan-access | portal | ssh | telnet | terminal } ] }
View
System view
Default level
3: Manage level
Parameters
user-name: Name for the local user, a case-sensitive string of 1 to 55 characters that does not contain the
domain name. It cannot contain any backward slash (\), forward slash (/), vertical line (|), colon (:),
asterisk (*), question mark (?), less-than sign (<), greater-than sign (>), and the @ sign and cannot be ―a‖,
―al‖, or ―all‖.
all: Specifies all users.
service-type: Specifies the users of a type.
 ftp—FTP users.
 lan-access—Users accessing the network through an Ethernet, such as 802.1X users.
 portal—Portal users.
 ssh—SSH users.
 telnet—Telnet users.
 terminal—Users logging in through the console port or AUX port.
Description
Use the local-user command to add a local user and enter local user view.
Use the undo local-user command to remove the specified local users.
By default, no local user is configured.
Related commands: display local-user and service-type.
Examples
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]
local-user password-display-mode
Syntax
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View
System view
To Next Page
Loading...
Need help?
General
