EasyManua.ls Logo

HP A5500 EI - Retry Stop-Accounting (RADIUS Scheme View); Secondary Accounting (RADIUS Scheme View)

HP A5500 EI
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
retry stop-accounting (RADIUS scheme view)
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS scheme view
Default level
2: System level
Parameters
retry-times: Maximum number of stop-accounting attempts, in the range 10 to 65535.
Description
Use the retry stop-accounting command to set the maximum number of stop-accounting attempts.
Use the undo retry stop-accounting command to restore the default.
By default, the maximum number of stop-accounting attempts is 500.
NOTE:
The maximum number of stop-accounting attempts, together with some other parameters, controls how
the NAS deals with stop-accounting request packets.
Suppose that the RADIUS server response timeout period is three seconds (set with the timer response-
timeout command), the maximum number of transmission attempts is five (set with the retry command),
and the maximum number of stop-accounting attempts is 20 (set with the retry stop-accounting
command). For each stop-accounting request, if the device receives no response within three seconds, it
retransmits the request. If it receives no responses after retransmitting the request five times, it considers
the stop-accounting attempt a failure, buffers the request, and makes another stop-accounting attempt. If
20 consecutive attempts fail, the device discards the request.
Related commands: reset stop-accounting-buffer, radius scheme, and display stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting attempts to 1000 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] retry stop-accounting 1000
secondary accounting (RADIUS scheme view)
Syntax
secondary accounting { ipv4-address [ port-number | key string | vpn-instance vpn-instance-name ] * |
ipv6 ipv6-address [ port-number | key string ] * }
undo secondary accounting [ ipv4-address | ipv6 ipv6-address ]
View
RADIUS scheme view

Table of Contents

Related product manuals