3
[Sysname] domain test
[Sysname-isp-test] accounting command hwtacacs-scheme hwtac
accounting default
Syntax
accounting default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme
radius-scheme-name [ local ] }
undo accounting default
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the accounting default command to configure the default accounting method for an ISP domain.
Use the undo accounting default command to restore the default.
By default, the default accounting method of an ISP domain is local.
The specified RADIUS or HWTACACS scheme must have been configured.
The default accounting method will be used for all users for whom no specific accounting methods are
configured.
Local accounting is only for monitoring and controlling the number of local user connections; it does not
provide the statistics function that the accounting feature generally provides.
Related commands: hwtacacs scheme and radius scheme.
Examples
# Configure the default accounting method for ISP domain test to use RADIUS accounting scheme rd and
use local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting default radius-scheme rd local
accounting lan-access
Syntax
accounting lan-access { local | none | radius-scheme radius-scheme-name [ local | none ] }
undo accounting lan-access
To Next Page
Loading...
Need help?
General
