145
View
System view
Default level
2: System level
Parameters
ip-address: Logs off the user with the specified IP address.
all: Logs off all users.
interface interface-type interface-number: Logs off all users on the specified interface.
Description
Use the portal delete-user command to log off users.
Related commands: display portal user.
Examples
# Log out the user whose IP address is 1.1.1.1.
<Sysname> system-view
[Sysname] portal delete-user 1.1.1.1
portal domain
Syntax
portal domain domain-name
undo portal domain
View
Interface view
Default level
2: System level
Parameters
domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 24 characters. The domain
specified by this argument must already exist.
Description
Use the portal domain command to specify an authentication domain for an interface. Then, the device
will use the authentication domain for authentication, authorization and accounting (AAA) of the portal
users on the interface.
Use the undo portal domain command to restore the default.
By default, no authentication domain is specified for an interface.
Related commands: display portal interface.
Examples
# Configure the authentication domain to be used for portal users on VLAN-interface 100 as my-domain.
(Supported by A5500 EI only)
<Sysname> system-view
To Next Page
Loading...
Need help?
General
