HP A5500 EI - Pki Certificate Attribute-Group; Pki Delete-Certificate

235
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy]
pki certificate attribute-group
Syntax
pki certificate attribute-group group-name
undo pki certificate attribute-group { group-name | all }
View
System view
Default level
2: System level
Parameters
group-name: Name for the certificate attribute group, a case-insensitive string of 1 to 16 characters. It
cannot be ―a‖, ―al‖, or ―all‖.
all: Specifies all certificate attribute groups.
Description
Use the pki certificate attribute-group command to create a certificate attribute group and enter its view.
Use the undo pki certificate attribute-group command to delete certificate attribute groups.
By default, no certificate attribute group exists.
Examples
# Create a certificate attribute group named mygroup and enter its view.
<Sysname> system-view
[Sysname] pki certificate attribute-group mygroup
[Sysname-pki-cert-attribute-group-mygroup]
pki delete-certificate
Syntax
pki delete-certificate { ca | local } domain domain-name
View
System view
Default level
2: System level
Parameters
ca: Deletes the locally stored CA certificate.
local: Deletes the locally stored local certificate.
domain-name: Name of the PKI domain whose certificates are to be deleted, a string of 1 to 15
characters.