135
ID number of the portal group to which the interface belongs.
If the interface does not belong to any portal group, None will be
displayed.
Authentication mode enabled on the interface
Mandatory authentication domain of the interface
Information of the portal authentication subnet
IP address of the portal authentication subnet
Subnet mask of the IP address of the portal authentication subnet
display portal local-server
Syntax
display portal local-server [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal local-server command to display configuration information about the local portal
server, including the supported protocol type and the referenced SSL server policy.
Related commands: portal local-server and portal local-server bind.
Examples
# Display configuration information about the local portal server.
<Sysname> display portal local-server
Protocol: HTTPS
Local-server IP: 255.255.255.255
Server policy: policy1
To Next Page
Loading...
Need help?
General
