15
The specified RADIUS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Related commands: local-user, authorization default, and radius scheme.
Examples
# Configure ISP domain test to use local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# Configure ISP domain test to use RADIUS scheme rd for authorization of portal users and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
authorization-attribute user-profile
Syntax
authorization-attribute user-profile profile-name
undo authorization-attribute user-profile
View
ISP domain view
Default level
3: Manage level
Parameters
profile-name: Name of the user profile, a case-sensitive string of 1 to 31 characters. For more information
about user profile configuration, see the Security Configuration Guide.
Description
Use the authorization-attribute user-profile command to specify the default authorization user profile for
an ISP domain.
Use the undo authorization-attribute user-profile command to restore the default.
By default, an ISP domain has no default authorization user profile.
After a user of an ISP domain passes authentication, if the server (or the access device in the case of
local authentication) does not authorize any user profile to the ISP domain, the system uses the user profile
specified by the authorization-attribute user-profile command as that of the ISP domain.
If you configure the authorization-attribute user-profile command repeatedly, only the last one takes
effect.
Examples
# Specify the default authorization user profile for domain test as profile1.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization-attribute user-profile profile1
To Next Page
Loading...
Need help?
General
