34
Default level
2: System level
Parameters
auto: Displays the password of a local user in the mode that is specified for the user by using the
password command.
cipher-force: Displays the passwords of all local users in cipher text.
Description
Use the local-user password-display-mode command to set the password display mode for all local users.
Use the undo local-user password-display-mode command to restore the default.
The default mode is auto.
If you configure the local-user password-display-mode cipher-force command, all existing local user
passwords will be displayed in cipher text, regardless of the configuration of the password command. If
you also save the configuration and restart the device, all existing local user passwords will always be
displayed in cipher text, no matter how you configure the local-user password-display-mode command or
the password command. The passwords configured after you restore the display mode to auto by using
the local-user password-display-mode auto command, however, are displayed as defined by the
password command.
Related commands: display local-user and password.
Examples
# Specify to display the passwords of all users in cipher text.
<Sysname> system-view
[Sysname] local-user password-display-mode cipher-force
password
Syntax
password { cipher | simple } password
undo password
View
Local user view
Default level
2: System level
Parameters
cipher: Displays the password in cipher text.
simple: Displays the password in plain text.
password: Password for the local user, case sensitive. It must be in plain text if you specify the simple
keyword and can be in plain or cipher text if you specify the cipher keyword. A password in plain text
must be a string of 1 to 63 characters that contains no blank space, for example, aabbcc. A password in
cipher text must be a string of 24 or 88 characters, for example, _(TT8F]Y\5SQ=^Q`MAF4<1!!.
To Next Page
Loading...
Need help?
General
