HP A5500 EI User Manual

24
self-service-url enable
Syntax
self-service-url enable url-string
undo self-service-url enable
View
ISP domain view
Default level
2: System level
Parameters
url-string: URL of the self-service server for changing user password, a string of 1 to 64 characters. It must
start with http:// and contain no question mark.
Description
Use the self-service-url enable command to enable the self-service server location function and specify the
URL of the self-service server for changing user password.
Use the undo self-service-url enable command to restore the default.
By default, the function is disabled.
A self-service RADIUS server, for example, iMC, is required for the self-service server location function.
With the self-service function, a user can manage and control his or her accounting information or card
number. A server with self-service software is a self-service server.
After you configure the self-service-url enable command, a user can locate the self-service server by
selecting [Service/Change Password] from the 802.1X client. The client software automatically launches
the default browser, IE or Netscape, and opens the URL page of the self-service server for changing the
user password. A user can change his or her password through the page.
Only authenticated users can select [Service/Change Password] from the 802.1X client. The option is
gray and unavailable for unauthenticated users.
Examples
# For ISP domain test, enable the self-service server location function and specify the URL of the self-
service server for changing user password to
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName
state (ISP domain view)
Syntax
state { active | block }
undo state
View
ISP domain view, local user view

HP A5500 EI Specifications

General

Brand	HP
Model	A5500 EI
Category	Network Router
Language	English