46
user-name user-name: Specifies a user by the username, a case-sensitive string of 1 to 80 characters.
Whether the user-name argument should include the domain name depends on the setting by the user-
name-format command for the RADIUS scheme.
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF fabric. If no IRF fabric exists, the slot-number
argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device by scheme, session ID, time range, username, or slot.
NOTE:
If the device sends a stop-accounting request to a RADIUS server but receives no response, it
retransmits it up to a certain number of times (defined by the retry command). If the device still receives
no response, it considers the stop-accounting attempt a failure, buffers the request, and makes another
stop-accounting attempt. The maximum number of the stop-accounting attempts is defined by the retry
stop-accounting command. If all attempts fail, the device discards the request.
Related commands: reset stop-accounting-buffer, stop-accounting-buffer enable, user-name-format,
retry, and retry stop-accounting.
Examples
# Display information about the buffered stop-accounting requests from 0:0:0 to 23:59:59 on March 31,
2011.
<Sysname> display stop-accounting-buffer time-range 0:0:0-03/31/2011 23:59:59-03/31/2011
Slot 1:
Total 0 record(s) Matched
key (RADIUS scheme view)
Syntax
key { accounting | authentication } string
undo key { accounting | authentication }
View
RADIUS scheme view
Default level
2: System level
Parameters
accounting: Sets the shared key for RADIUS accounting packets.
To Next Page
Loading...
Need help?
General
