42
Interval for realtime
accounting(minute)
Interval for realtime accounting in minutes
Retransmission times of
realtime-accounting packet
Retransmission times of realtime-accounting packet
Retransmission times of stop-
accounting packet
Retransmission times of stop-accounting packet
Quiet interval for the primary server
Format of the usernames to be sent to the RADIUS server
Source IP address for outgoing RADIUS packets
Backup source IP address for outgoing RADIUS packets
Interprets RADIUS attribute 25 as the CAR parameters
display radius statistics
Syntax
display radius statistics [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF fabric. If no IRF fabric exists, the slot-number
argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display radius statistics command to display statistics about RADIUS packets.
Related commands: radius scheme.
Examples
# Display statistics about RADIUS packets on slot 1.
<Sysname> display radius statistics slot 1
To Next Page
Loading...
Need help?
General
