37
View
System view
Default level
3: Manage level
Parameters
group-name: User group name, a case-insensitive string of 1 to 32 characters.
Description
Use the user-group command to create a user group and enter its view.
Use the undo user-group command to remove a user group.
A user group consists of a group of local users and has a set of local user attributes. You can configure
local user attributes for a user group to implement centralized management of user attributes for the local
users in the group. Configurable user attributes include password control attributes and authorization
attributes.
A user group with one or more local users cannot be removed.
The default system user group system cannot be removed, but you can change its configurations.
Related commands: display user-group.
Examples
# Create a user group named abc and enter its view.
<Sysname> system-view
[Sysname] user-group abc
[Sysname-ugroup-abc]
RADIUS configuration commands
accounting-on enable
Syntax
accounting-on enable [ interval seconds | send send-times ] *
undo accounting-on enable
View
RADIUS scheme view
Default level
2: System level
Parameters
seconds: Time interval for retransmitting an accounting-on packet in seconds, ranging from 1 to 15. The
default is 3 seconds.
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255. The
default is 5.
To Next Page
Loading...
Need help?
General
