77
Parameters
hwtacacs-scheme-name: HWTACACS scheme name, a case-insensitive string of 1 to 32 characters.
Description
Use the hwtacacs scheme command to create an HWTACACS scheme and enter HWTACACS scheme
view.
Use the undo hwtacacs scheme command to delete an HWTACACS scheme.
By default, no HWTACACS scheme exists.
You cannot delete an HWTACACS scheme with online users.
Examples
# Create an HWTACACS scheme named hwt1 and enter HWTACACS scheme view.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1]
key (HWTACACS scheme view)
Syntax
key { accounting | authentication | authorization } string
undo key { accounting | authentication | authorization } string
View
HWTACACS scheme view
Default level
2: System level
Parameters
accounting: Sets the shared key for HWTACACS accounting packets.
authentication: Sets the shared key for HWTACACS authentication packets.
authorization: Sets the shared key for HWTACACS authorization packets.
string: Shared key, a case-sensitive string of 1 to 64 characters.
Description
Use the key command to set the shared key for HWTACACS authentication, authorization, or accounting
packets.
Use the undo key command to remove the configuration.
By default, no shared key is configured.
Related commands: display hwtacacs.
Examples
# Set the shared key for HWTACACS accounting packets to hello for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting hello
To Next Page
Loading...
Need help?
General
