256
<Sysname> system-view
[Sysname] ipsec policy policy1 101 manual
[Sysname-ipsec-policy-manual-policy1-101]
ipsec proposal
Syntax
ipsec proposal proposal-name
undo ipsec proposal proposal-name
View
System view
Default level
2: System level
Parameters
proposal-name: Name for the proposal, a case-insensitive string of 1 to 15 characters .
Description
Use the ipsec proposal command to create an IPsec proposal and enter its view.
Use the undo ipsec proposal command to delete an IPsec proposal.
By default, no IPsec proposal exists.
An IPsec proposal created by using the ipsec proposal command takes the security protocol of ESP, the
encryption algorithm of DES, and the authentication algorithm of MD5 by default.
Related commands: display ipsec proposal.
Examples
# Create an IPsec proposal named newprop1.
<Sysname> system-view
[Sysname] ipsec proposal newprop1
proposal
Syntax
proposal proposal-name&<1-6>
undo proposal [ proposal-name ]
View
IPsec policy view
Default level
2: System level
Parameters
proposal-name&<1-6>: Name of the IPsec proposal for the IPsec policy to reference, a string of 1 to 15
characters. &<1-6> means that you can specify the proposal-name argument for up to six times.
To Next Page
Loading...
