272
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ssh server-info command on a client to display mappings between SSH servers and their
host public keys saved on the client.
When an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the
server for the authentication. If the authentication fails, use this command to check the public key of the
server saved on the client.
Related commands: ssh client authentication server.
NOTE:
This command is also available on an SFTP client.
Examples
# Display the mappings between host public keys and SSH servers saved on the client.
<Sysname> display ssh server-info
Server Name(IP) Server public key name
______________________________________________________
192.168.0.1 abc_key01
192.168.0.2 abc_key02
Table 44 Output description
Name or IP address of the server
Name of the host public key of the server
ssh client authentication server
Syntax
ssh client authentication server server assign publickey keyname
undo ssh client authentication server server assign publickey
To Next Page
Loading...
Need help?
General
