82
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF fabric. If no IRF fabric exists, the slot-number
argument is the current device number.
Description
Use the reset hwtacacs statistics command to clear HWTACACS statistics.
Related commands: display hwtacacs.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ slot slot-number ]
View
User view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a string of 1 to
32 characters.
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF fabric. If no IRF fabric exists, the slot-number
argument is the current device number.
Description
Use the reset stop-accounting-buffer command to clear the buffered stop-accounting requests that get no
responses.
Related commands: stop-accounting-buffer enable, retry stop-accounting, and display stop-accounting-
buffer.
Examples
# Clear the buffered stop-accounting requests for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1
retry stop-accounting (HWTACACS scheme view)
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
To Next Page
Loading...
Need help?
General
