193
Default level
2: System level
Parameters
delay delay: Specifies the maximum number of days during which a user can log in using an expired
password. It must be in the range 1 to 90.
times times: Specifies the maximum number of times a user can log in after the password expires, in the
range 0 to 10. 0 means that a user cannot log in after the password expires.
Description
Use the password-control expired-user-login command to set the maximum number of days and
maximum number of times that a user can log in after the password expires.
Use the undo password-control expired-user-login command to restore the defaults.
By default, a user can log in three times within 30 days after the password expires.
Related commands: display password-control.
Examples
# Specify that a user can log in five times within 60 days after the password expires.
<Sysname> system-view
[Sysname] password-control expired-user-login delay 60 times 5
password-control history
Syntax
password-control history max-record-num
undo password-control history
View
System view
Default level
2: System level
Parameters
max-record-num: Specifies the maximum number of history password records for each user, in the range 2
to 15.
Description
Use the password-control history command to set the maximum number of history password records for
each user.
Use the undo password-control history command to restore the default.
By default, the maximum number of history password records for each user is 4.
Examples
# Set the maximum number of history password records for each user to 10.
<Sysname> system-view
[Sysname] password-control history 10
To Next Page
Loading...
Need help?
General
