289
File successfully renamed
rmdir
Syntax
rmdir remote-path&<1-10>
View
SFTP client view
Default level
3: Manage level
Parameters
remote-path&<1-10>: Names of directories on the remote SFTP server. &<1-10> means that you can
provide up to 10 directory names that are separated by space.
Description
Use the rmdir command to delete the specified directories from an SFTP server.
Examples
# On the SFTP server, delete directory temp1 in the current directory.
sftp-client> rmdir temp1
Directory successfully removed
sftp
Syntax
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } | prefer-ctos-
cipher { 3des | aes128 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex {
dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | des } | prefer-
stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
View
User view
Default level
3: Manage level
Parameters
server: IPv4 address or host name of the server, a case-insensitive string of 1 to 20 characters.
port-number: Port number of the server, in the range 0 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the server belongs to, where vpn-
instance-name is a case-sensitive string of 1 to 31 characters. This keyword and argument combination is
available only on the A5500 EI Switch Series. If the server is on the public network, do not specify this
keyword and argument combination.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. The default is dsa.
prefer-ctos-cipher: Preferred encryption algorithm from client to server, defaulted to aes128.
ï‚· 3des: Encryption algorithm 3des-cbc.
To Next Page
Loading...
Need help?
General
