8
Default level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the authentication lan-access command to configure the authentication method for LAN users.
Use the undo authentication lan-access command to restore the default.
By default, the default authentication method for the ISP domain is used for LAN users.
The specified RADIUS scheme must have been configured.
Related commands: local-user, authentication default, and radius scheme.
Examples
# Configure ISP domain test to use local authentication for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access local
# Configure ISP domain test to use RADIUS authentication scheme rd for LAN users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access radius-scheme rd local
authentication login
Syntax
authentication login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme
radius-scheme-name [ local ] }
undo authentication login
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
To Next Page
Loading...
Need help?
General
