181
User profile configuration commands
display user-profile
Syntax
display user-profile [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display user-profile command to display information of all the user profiles that have been
created.
Examples
# Display information of all the user profiles that have been created.
<Sysname> display user-profile
Status User profile AuthType
disabled a123 PORTAL
enabled b123 DOT1X
----Total user profiles: 2-------
----Enabled user profiles: 1-------
Table 23 Output description
Status of the user profile:
ï‚· enabled
ï‚· disabled
To Next Page
Loading...
Need help?
General
