HP A5500 EI - Ldap-Server; Locality

232
By default, no IP address is specified for an entity.
Examples
# Configure the IP address of an entity as 11.0.0.1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] ip 11.0.0.1
ldap-server
Syntax
ldap-server ip ip-address [ port port-number ] [ version version-number ]
undo ldap-server
View
PKI domain view
Default level
2: System level
Parameters
ip-address: IP address of the LDAP server, in dotted decimal format.
port-number: Port number of the LDAP server, in the range 1 to 65535. The default is 389.
version-number: LDAP version number, either 2 or 3. By default, it is 2.
Description
Use the ldap-server command to specify an LDAP server for a PKI domain.
Use the undo ldap-server command to remove the configuration.
By default, no LDP server is specified for a PKI domain.
Examples
# Specify an LDAP server for PKI domain 1.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] ldap-server ip 169.254.0.30
locality
Syntax
locality locality-name
undo locality
View
PKI entity view
Default level
2: System level