71
[Sysname] radius scheme radius1
[Sysname-radius-radius1] user-name-format without-domain
vpn-instance (RADIUS scheme view) (available only on the
A5500 EI)
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
View
RADIUS scheme view
Default level
2: System level
Parameters
vpn-instance-name: Name of a VPN instance, a string of 1 to 31 case-sensitive characters.
Description
Use the vpn-instance command to specify a VPN instance for the RADIUS scheme.
Use the undo vpn-instance command to remove the configuration.
The VPN instance specified here applies to for all IPv4 servers in the RADIUS scheme for which no
specific VPN instance is specified. The VPN instance specified here is not effective for IPv6 RADIUS
servers.
Related commands: radius scheme and display radius scheme.
Examples
# Specify VPN instance test for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] vpn-instance test
HWTACACS configuration commands
data-flow-format (HWTACACS scheme view)
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet | kilo-
packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
View
HWTACACS scheme view
Default level
2: System level
To Next Page
Loading...
Need help?
General
