HP A5500 EI - ARP Attack Protection Configuration Commands; ARP Defense Against IP Packet Attacks

303
You cannot delete an SSL server policy that has been associated with one or more application layer
protocols.
Related commands: display ssl server-policy.
Examples
# Create SSL server policy policy1 and enter its view.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1]
version
Syntax
version { ssl3.0 | tls1.0 }
undo version
View
SSL client policy view
Default level
2: System level
Parameters
ssl3.0: Specifies SSL 3.0.
tls1.0: Specifies TLS 1.0.
Description
Use the version command to specify the SSL protocol version for an SSL client policy.
Use the undo version command to restore the default.
By default, the SSL protocol version for an SSL client policy is TLS 1.0.
Related commands: display ssl client-policy.
Examples
# Specify the SSL protocol version for SSL client policy policy1 as SSL 3.0.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1] version ssl3.0