EasyManua.ls Logo

HP A5500 EI - Peer-Public-Key End; Public-Key-Code Begin

HP A5500 EI
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
210
peer-public-key end
Syntax
peer-public-key end
View
Public key view
Default level
2: System level
Parameters
None
Description
Use the peer-public-key end command to return from public key view to system view.
Related commands: public-key peer.
Examples
# Exit public key view.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key] peer-public-key end
[Sysname]
public-key-code begin
Syntax
public-key-code begin
View
Public key view
Default level
2: System level
Parameters
None
Description
Use the public-key-code begin command to enter public key code view. Then input the key data in the
correct format to specify the peer host or server public key. Spaces and carriage returns are allowed
between characters.
If the peer is an HP device, input the key data displayed by the display public-key local public command
so that the key is format compliant.
Do not configure an RSA server public key of the peer for identity authentication in SSH applications.
Authentication in SSH applications uses the RSA host public key. For more information about SSH, see the
chapter SSH2.0 configuration.
Related commands: public-key peer and public-key-code end.

Table of Contents

Related product manuals