HP A5500 EI User Manual

169
<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
000d-88f8-0577 1 Security GigabitEthernet1/0/1 NOAGED
--- 1 mac address(es) found ---
Table 22 Output description
Field
Description
MAC ADDR
Secure MAC address
VLAN ID
ID of the VLAN to which the port belongs
STATE
Type of the MAC address added. "Security" means it is a secure
MAC address.
PORT INDEX
Port to which the secure MAC address belongs
AGING TIME(s)
Period of time before the secure MAC address ages out.
"NOAGED" is displayed for secure MAC addresses.
x mac address(es) found
Number of secure MAC addresses stored
port-security authorization ignore
Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the port-security authorization ignore command to configure a port to ignore the authorization
information from the RADIUS server.
Use the undo port-security authorization ignore command to restore the default.
By default, a port uses the authorization information from the RADIUS server.
After a user passes RADIUS authentication, the RADIUS server performs authorization based on the
authorization attributes configured for the user’s account. For example, it may assign a VLAN.
Related commands: display port-security.
Examples
# Configure port GigabitEthernet 1/0/1 to ignore the authorization information from the RADIUS server.
<Sysname> system-view

HP A5500 EI Specifications

General

Brand	HP
Model	A5500 EI
Category	Network Router
Language	English