HP A5500 EI - Page 129

119
Current user number amounts to 0
Current domain: not configured, use default domain
Silent Mac User info:
MAC Addr From Port Port Index
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 0, failed: 0
Max number of on-line users is 256
Current online user number is 0
MAC Addr Authenticate state AuthIndex
……(output omitted)
Table 10 Output description
Field
Description
MAC address authentication is enabled
Whether MAC authentication is enabled
User name format is MAC address in lowercase,
like xxxxxxxxxxxx
Type of user account, which can be MAC-based or
shared.
 If MAC-based accounts are used, this field displays
―User name format is MAC address…‖ and the
format settings for usernames and passwords. For
example, MAC addresses without hyphens in lower
case.
 If a shared account is used, this field displays "User
name format is fixed account."
Fixed username:
Username of the shared account for MAC
authentication users. If MAC-based accounts are used,
this field displays mac.
Fixed password:
Password of the shared account for MAC authentication
users. If MAC-based accounts are used, this field
displays not configured.
Offline detect period
Setting of the offline detect timer
Quiet period
Setting of the quiet timer
Server response timeout value
Setting of the server timeout timer
the max allowed user number
Maximum number of users each slot in the device
supports
Current user number amounts to
Number of online users
Current domain: not configured, use default
domain
Authentication domain that is currently used
Silent Mac User info
Information about silent MAC addresses. A MAC
address is marked silent when it fails a MAC
authentication, and at the same time, a quiet timer
starts. Before the timer expires, the device drops any
packet from the MAC address and does not perform
MAC authentication for the MAC address.