HP A5500 EI - Page 193

183
View
System view
Default level
2: System level
Parameters
profile-name: Assign a name for the use profile. The name is a, case-sensitive string of 1 to 31 characters.
It can only contain English letters, numbers, and underlines, and it must start with an English letter. A user
profile name must be globally unique.
Description
Use the user-profile command to create a user profile and enter the user profile view. If the specified user
profile has been created, you enter the user profile view.
Use the undo user-profile command to remove an existing disabled user profile. You cannot remove a
user profile that is enabled.
By default, no user profiles exist on the device.
Related commands: user-profile enable.
Examples
# Create a user profile a123.
<Sysname> system-view
[Sysname] user-profile a123
[Sysname-user-profile-a123]
# Enter the user profile view of a123.
<Sysname> system-view
[Sysname] user-profile a123
[Sysname-user-profile-a123]