HP A5500 EI - Page 30

20
Related commands: access-limit enable, domain, and state.
Examples
# Display the configuration information of all ISP domains.
<Sysname> display domain
0 Domain : system
State : Active
Access-limit : Disabled
Accounting method : Required
Default authentication scheme : local
Default authorization scheme : local
Default accounting scheme : local
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes :
1 Domain : test
State : Active
Access-limit : Disabled
Accounting method : Required
Default authentication scheme : local
Default authorization scheme : local
Default accounting scheme : local
Lan-access authentication scheme : radius:test, local
Lan-access authorization scheme : hwtacacs:hw, local
Lan-access accounting scheme : local
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes :
User-profile : profile1
Default Domain Name: system
Total 2 domain(s).
Table 2 Output description
Field
Description
Domain
Domain name
State
Status of the domain (active or block)
Access-limit
Limit on the number of user connections
Accounting method
Accounting method (either required or optional)
Default authentication scheme
Default authentication method
Default authorization scheme
Default authorization method
Default accounting scheme
Default accounting method
Lan-access authentication scheme
Authentication method for LAN users