40
Default level
2: System level
Parameters
radius-scheme-name: RADIUS scheme name.
slot slot-number: Specifies the member number of the switch in the IRF fabric, which you can display with
the display irf command. The value range for the slot-number argument depends on the number of
members and numbering conditions in the current IRF fabric. If no IRF fabric exists, the slot-number
argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display radius scheme command to display the configuration information of RADIUS schemes.
If no RADIUS scheme is specified, the command displays the configuration information of all RADIUS
schemes.
If no IRF member ID is specified, the command displays the configuration information of the RADIUS
schemes on all members of an IRF fabric.
Related commands: radius scheme.
Examples
# Display the configuration information of all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName : radius1
Index : 0 Type : extended
Primary Auth Server:
IP: 1.1.1.1 Port: 1812 State: active
Encryption Key : 345
VPN instance : 1
Primary Acct Server:
IP: 1.1.1.1 Port: 1813 State: active
Encryption Key : 345
VPN instance : 1
Second Auth Server:
IP: 1.1.2.1 Port: 1812 State: active
Encryption Key : N/A
VPN instance : N/A
IP: 1.1.3.1 Port: 1812 State: active
Encryption Key : N/A
VPN instance : N/A
Second Acct Server:
IP: 1.1.2.1 Port: 1813 State: block
To Next Page
Loading...
Need help?
General
