HP A5500 EI User Manual

73
Description
Use the display hwtacacs command to display the configuration information or statistics of HWTACACS
schemes.
If no HWTACACS scheme is specified, the command displays the configuration information of all
HWTACACS schemes.
If no slot number is specified, the command displays the configuration information of the HWTACACS
scheme on the main processing unit.
If no IRF member ID is specified, the command displays the configuration information of the HWTACACS
schemes on all members of an IRF fabric.
Related commands: hwtacacs scheme.
Examples
# Display configuration information about HWTACACS scheme gy.
<Sysname> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name : gy
Primary-authentication-server : 172.31.1.11:49
VPN instance : vpn1
Primary-authorization-server : 172.31.1.11:49
VPN instance : vpn1
Primary-accounting-server : 172.31.1.11:49
VPN instance : vpn1
Secondary-authentication-server : 0.0.0.0:0
VPN instance : -
Secondary-authorization-server : 0.0.0.0:0
VPN instance : -
Secondary-accounting-server : 0.0.0.0:0
VPN instance : -
Current-authentication-server : 172.31.1.11:49
Current-authorization-server : 172.31.1.11:49
Current-accounting-server : 172.31.1.11:49
NAS-IP-address : 0.0.0.0
key authentication : 790131
key authorization : 790131
key accounting : 790131
VPN instance : -
Quiet-interval(min) : 5
Realtime-accounting-interval(min) : 12
Response-timeout-interval(sec) : 5
Acct-stop-PKT retransmit times : 100
Username format : with-domain
Data traffic-unit : B
Packet traffic-unit : one-packet
--------------------------------------------------------------------

HP A5500 EI Specifications

General

Brand	HP
Model	A5500 EI
Category	Network Router
Language	English