NOTE: The switch allows one medPortLocation entry per port (without regard to type). Configuring a
new medPortLocation entry of any type on a port replaces any previously configured entry on that
port.
civic-addr <COUNTRY-STR> <WHAT> <CA-TYPE> <CA-VALUE> … [< CA-TYPE > < CA-VALUE >] … [< CA-TYPE > < CA-VALUE >]
Enables configuration of a physical address on a switch port and allows up to 75 characters of address
information.
COUNTRY-STR
A two-character country code, as defined by ISO 3166. Some examples include FR
(France), DE (Germany), and IN (India). This field is required in a civic-addr
command. (For a complete list of country codes, visit
http://www.iso.org.)
WHAT
A single-digit number specifying the type of device to which the location data
applies:
0: Location of DHCP server
1: Location of switch
2: Location of LLDP-MED endpoint (recommended application)
This field is required in a civic-addr command.
Table Continued
Chapter 7 Configuring for Network Management Applications 239
To Next Page
Loading...
