HP Aruba JL253A - Page 329

Activate Connection Status : Success
Error Reason : NA
Unsuccessful Activate connection when device entry not present in Activate
switch(config)# show activate provision
Configuration and Status - Activate Provision Service
Activate Provision Service : Enabled
Activate Server Address : device.arubanetworks.com
Activation Key : Not Available
NTP/HTP Time Sync Status : Time sync from NTP
Activate DNS Resolution : Success
Proxy Server DNS Lookup : NA
Activate Connection Lookup : Failure
Error Reason : Failed response received.
Status code : not-authenticated
Activate pushing AirWave parameters to switch
switch(config)#show activate provision
Configuration and Status - Activate Provision Service
Activate Provision Service : Enabled
Activate Server Address : device.arubanetworks.com
Activation Key : ZAELQSRB
NTP/HTP Time Sync Status : Time sync from NTP
Activate DNS Lookup : Success
Proxy Server DNS Lookup : NA
Activate Connection Status : Success
Error Reason : NA
Unsuccessful Activate connection due to unresolved Activate server address
switch(config)#show activate provision
Configuration and Status - Activate Provision Service
Activate Provision Service : Enabled
Activate Server Address : device.arubanetworks.com
Activation Key : Not Available
Time Sync Status : Time sync from NTP pool
Activate DNS Lookup : Failure
Proxy Server DNS Lookup : NA
Activate Connection Status : NA
Error Reason : NA
NOTE: DNS resolution is a field in the WebUI (under Dependencies section), it will show DNS
resolution as failure .
Chapter 10 Zero Touch Provisioning with AirWave and Central 329