Data file Operation note
core-dump
Copy core-dump file from flash.
crash-data
Copy the switch crash-data file.
crash-log a|b|
c|d|e|f|g|h|
master
Copy the switch crash-log file.
crash-files
Copy core-dump, crash-data, crash-log, fdr-log, and event-log files to an SFTP/TFTP
server, or xmodem terminal.
When using the crash-files option, the destination directory alone must be
specified as the destination path. Specifying the file names is not mandatory.
default-config
Copy custom default-config file.
event-log
Copy event-log file.
fdr-log
Copy FDR-og file from the switch to an SFTP/TFTP server or xmodem terminal.
flash
Copy the switch system image file.
SFTP server
Copy data from a SFTP server.
startup-config
Copy in-flash configuration file.
ssh-client-
known-hosts
Copy the known hosts file.
ssh-server-
pub-key
Copy the switch's SSH server public key.
running-config
Copy running configuration file.
TFTP
Copy data from a TFTP server.
xmodem
Use xmodem on the terminal as the data source.
Destination
Specify the copy target.
Destination
SFTP
TFTP
USB (available only on the 2930M Switch Series)
xmodem
Chapter 11 File Transfers 365
To Next Page
Loading...
