HP Aruba JL253A - Page 381

[no] process-tracking [slot[SLOT-LIST] [<time>]] [<time>]
Enables/disables module process-tracking functionality.
process-tracking <tab>
slot
Enables/disables process-tracking for a module.
INTEGER
Specifies time to track value between 1 second to 30 seconds.
<cr>
process-tracking slot <tab>
SLOT-ID-RANGE
Enter an alphabetic device slot identifier or slot range.
process-tracking slot A
INTEGER
Specifies time to track value between 1 second to 30 seconds.
<cr>
process-tracking slot A 10 <tab>
<cr>
process-tracking 10 <tab>
<cr>
Syntax:
show cpu [<CHASSIS_MIN_CPU_UTIL_INDEX-CHASSIS_MAX_CPU_UTIL_INDEX>]
[slot <SLOT-LIST>
[<CHASSIS_MIN_CPU_UTIL_INDEX-CHASSIS_MODULE_MAX_CPU_UTIL_INDEX>]]
[process [[slot <SLOT-LIST>] [refresh <iterations>]]
[refresh <iterations>]
Shows average CPU utilization over the last 1, 5, and 60 seconds, or the number of seconds specified.
Use the slot option to display CPU utilization for the specified modules, rather than the chassis CPU.
Use the process option to display module process usages.
Syntax:
show cpu process [slot [SLOT-LIST][refresh <iterations>]]
[refresh <iterations>]
Displays module process usage.
show cpu <tab>
process
Displays process usage.
slot
Displays module CPU statistics.
Table Continued
Chapter 12 Monitoring and Analyzing Switch Operation 381