<1-300>
Time (in seconds) over which to average CPU utilization.
<cr>
show cpu process <tab>
refresh
Number of times to refresh process usage display.
slot
Displays module process usage.
<cr>
show cpu process refresh <tab>
INTEGER
Enter an integer number.
show cpu process refresh 10 <tab>
<cr>
show cpu process slot <tab>
SLOT-ID-RANGE
Enter an alphabetic device slot identifier or slot range.
show cpu process slot A <tab>
refresh
Number of times to refresh process usage display.
<cr>
show cpu process slot A refresh <tab>
INTEGER
Enter an integer number.
show cpu process slot A refresh 10 <tab>
<cr>
Output for the show cpu process command
switch# show cpu process
| Recent | % | Time Since | Times | Max
Process Name | Priority | Time | CPU | Last Ran | Ran | Time
----------------- + --------- + ------ + ---- + ---------- + ------ + -------
Idle-1 | 226 | 10 s | 41 | 57 us | 380986 | 69 us
Idle-3 | 1 | 5 s | 20 | 52 us | 761665 | 55 us
Idle-0 | 226 | 8 s | 33 | 19 us | 380867 | 66 us
Sessions & I/O-24 | 171 | 926 ms | 3 | 1 ms | 150 | 335 ms
Output for the show cpu process slot <slot-list> command
switch# show cpu process slot A
slot a:
382 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
