---- ------ ----------- ---------------------
1/1 1-2 OK 5m
3-6 OK 5m
4-5 OK 7m
7-8 OK 7m
1/2 1-2 OK 7m
3-6 OK 7m
4-5 OK 7m
7-8 OK 7m
1/3 1-2 OK 5m
3-6 OK 7m
4-5 OK 5m
7-8 OK 7m
1/4 1-2 OK 7m
3-6 OK 7m
4-5 OK 7m
7-8 OK 5m
1/5 1-2 OK 4m
3-6 OK 5m
4-5 OK 5m
7-8 OK 4m
1/6 1-2 OK 4m
3-6 OK 4m
4-5 OK 4m
7-8 OK 4m
1/7 1-2 OK 5m
3-6 OK 4m
4-5 OK 5m
7-8 OK 4m
1/8 1-2 OK 4m
3-6 OK 5m
4-5 OK 4m
7-8 OK 4m
1/9 1-2 OK 5m
3-6 OK 5m
4-5 OK 5m
7-8 OK 5m
1/10 1-2 OK 7m
3-6 OK 5m
4-5 OK 5m
7-8 OK 5m
Good cable tests
switch# test cable-diagnostics 51
This command will cause a loss of link on all tested ports and will take
several seconds per port to complete. Use the 'show cable-diagnostics'
command to view the results.
Continue (y/n)? Y
switch# show cable-diagnostics 51
Cable Diagnostic Status - Transceiver Ports
MDI Cable Distance Pair Pair MDI
Port Pair Status to Fault Skew Polarity Mode
---- ------ --------- -------- ----- ------- -----
51 1-2 OK 0 m 8 ns Normal MDI
3-6 OK 0 m 8 ns Normal
4-5 OK 0 m 8 ns Normal MDIX
7-8 OK 0 m 0 ns Normal
644 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
