To Next Page

To Previous Page

197

# Configure an IP address for interface Dialer 1.

[RouterA] interface dialer 1

[RouterA-Dialer1] ip address 122.1.1.1 255.255.255.0

# Enable bundle DDR on the interface.

[RouterA-Dialer1] dialer bundle enable

# Specify the host name of the remote router allowed to call in.

[RouterA-Dialer1] dialer peer-name userc

# Associate the interface with dialer group 1.

[RouterA-Dialer1] dialer-group 1

# Configure PAP authentication on the interface.

[RouterA-Dialer1] ppp authentication-mode pap

[RouterA-Dialer1] ppp pap local-user usera password simple usera

# Configure the dial string for calling Router C.

[RouterA-Dialer1] dialer number 8810063

[RouterA-Dialer1] quit

# Configure interface Serial 2/1/0 to operate as an asynchronous interface in protocol mode.

[RouterA] interface serial 2/1/0

[RouterA-Serial2/1/0] physical-mode async

[RouterA-Serial2/1/0] async-mode protocol

# Assign the interface to Dialer 0 and Dialer 1.

[RouterA-Serial2/1/0] dialer bundle-member 0

[RouterA-Serial2/1/0] dialer bundle-member 1

# Enable PPP encapsulation on the interface.

[RouterA-Serial2/1/0] link-protocol ppp

# Configure PAP authentication on the interface.

[RouterA-Serial2/1/0] ppp authentication-mode pap

[RouterA-Serial2/1/0] ppp pap local-user usera password simple usera

[RouterA-Serial2/1/0] quit

# Configure interface Serial 2/1/1 to operate as an asynchronous interface in protocol mode.

[RouterA] interface serial 2/1/1

[RouterA-Serial2/1/1] physical-mode async

[RouterA-Serial2/1/1] async-mode protocol

# Assign the interface to Dialer 0 and Dialer 1.

[RouterA-Serial2/1/1] dialer bundle-member 0

[RouterA-Serial2/1/1] dialer bundle-member 1

# Enable PPP encapsulation on the interface.

[RouterA-Serial2/1/1] link-protocol ppp

# Configure PAP authentication on the interface.

[RouterA-Serial2/1/1] ppp authentication-mode pap

[RouterA-Serial2/1/1] ppp pap local-user usera password simple usera

[RouterA-Serial2/1/1] quit

# Configure user lines to be used, and enable modem dial-in and dial-out on them.

[RouterA] line tty1

[RouterA-line-tty1] modem enable both

[RouterA-line-tty1] quit

Brand

Model

MSR Router Series

Brand	HP
Model	MSR Router Series
Category	Network Router
Language	English

HP MSR Router Series User Manual

Table of Contents

Other manuals for HP MSR Router Series

Questions and Answers:

HP MSR Router Series Specifications

Related product manuals