EasyManuals Logo

HP MSR Router Series User Manual

HP MSR Router Series
293 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #215 background imageLoading...
Page #215 background image
206
[RouterA-Bri2/4/1] ppp mp
# Enable PPP encapsulation on the interface.
[RouterA-Bri2/4/1] link-protocol ppp
# Configure PAP authentication on the interface.
[RouterA-Bri2/4/1] ppp authentication-mode pap
[RouterA-Bri2/4/1] ppp pap local-user usera password simple usera
[RouterA-Bri2/4/1] quit
# Configure PPP authentication on BRI 2/4/0, and assign BRI 2/4/0 to dialer bundle 0.
[RouterA-Bri2/4/0] interface bri 2/4/0
[RouterA-Bri2/4/0] dialer bundle-member 0
# Enable MP for the interface.
[RouterA-Bri2/4/0] ppp mp
# Enable PPP encapsulation on the interface.
[RouterA-Bri2/4/0] link-protocol ppp
# Configure PAP authentication on the interface.
[RouterA-Bri2/4/0] ppp authentication-mode pap
[RouterA-Bri2/4/0] ppp pap local-user usera password simple usera
2. Configure Router B:
# Create dialer group 2 and configure a dial rule for it.
<RouterB> system-view
[RouterB] dialer-group 2 rule ip permit
# Create a local user usera for authenticating Router A, and configure the service type as PPP.
[RouterB] local-user usera class network
[RouterB-luser-network-usera] password simple usera
[RouterB-luser-network-usera] service-type ppp
[RouterB-luser-network-usera] quit
# Set the traffic statistics collection interval to 3 seconds.
[RouterB] dialer flow-interval 3
# Configure an IP address for interface Dialer 0.
[RouterB] interface dialer 0
[RouterB-Dialer0] ip address 100.1.1.2 255.255.255.0
# Enable traditional DDR on the interface.
[RouterB-Dialer0] dialer circular enable
# Associate the interface with dialer group 2.
[RouterB-Dialer0] dialer-group 2
#Configure the dial strings for calling Router A.
[RouterB-Dialer0] dialer route ip 100.1.1.1 8810048
[RouterB-Dialer0] dialer route ip 100.1.1.1 8810049
# Enable MP for the interface.
[RouterB-Dialer0] ppp mp
# Configure PAP authentication on the interface.
[RouterB-Dialer0] ppp authentication-mode pap
[RouterB-Dialer0] ppp pap local-user userb password simple userb
[RouterB-Dialer0] quit
# Bundle timeslots on CE1/PRI interface E1 2/3/0 into a PRI group.

Table of Contents

Other manuals for HP MSR Router Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP MSR Router Series and is the answer not in the manual?

HP MSR Router Series Specifications

General IconGeneral
BrandHP
ModelMSR Router Series
CategoryNetwork Router
LanguageEnglish

Related product manuals