HPE Apollo 2000 User Manual

HPE Apollo 2000 System 7
HPE Apollo 2000 System
Introduction
The HPE Apollo 2000 System consists of a chassis and nodes. There are three chassis options with
different storage configurations. The four server tray slots on the chassis must be populated with server
nodes or node blanks.
Chassis
• HPE Apollo r2200 Chassis (12 low-profile LFF model)
• HPE Apollo r2600 Chassis (24 SFF model)
• HPE Apollo r2800 Chassis (24 SFF model with storage expander backplane)
Nodes
• HPE ProLiant XL170r Gen9 Server Node (1U)
• HPE ProLiant XL190r Gen9 Server Node (2U)
The chassis supports the combination of 1U and 2U nodes. One chassis can support a maximum of the
following:
• Four 1U nodes
• Two 1U nodes and one 2U node
• Two 2U nodes
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).

HPE Apollo 2000 Specifications

General

Form Factor	2U
Memory Type	DDR4
Max Processors	2
Memory Slots	16 DIMM slots per server tray
Storage Options	SAS, SATA
Networking	FlexibleLOM
Network	1/10/25/40/100 GbE options
Power Supply	Redundant Power Supplies
Power Supply Options	1600W
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Storage	Up to 24 drives