HPE Apollo 2000 User Manual

Hardware options installation 124
22.
If installing NVIDIA GRID K2 Reverse Air Flow GPU Accelerators, connect the 2-pin adapter cables
to the accelerators and the riser board.
23. Install the riser cage bracket.
24. Connect the power cable to the bayonet board. For more information, see "Accelerator cabling (on
page 144)."
25. Install the three-slot riser cage assembly ("Three-slot riser cage assembly options" on page 93).
26. Install the node into the chassis ("Installing a node into the chassis" on page 60).
27. Connect all peripheral cables to the nodes.
28. Power up the node ("Power up the nodes" on page 32).
M.2 SATA SSD enablement board
The M.2 SATA SSD enablement board can only be installed on the single-slot left PCI riser cage
assembly (PN 798178-B21) or the single-slot 2U node PCI riser cage assembly (PN 800293-B21).
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).

HPE Apollo 2000 Specifications

General

Form Factor	2U
Memory Type	DDR4
Max Processors	2
Memory Slots	16 DIMM slots per server tray
Storage Options	SAS, SATA
Networking	FlexibleLOM
Network	1/10/25/40/100 GbE options
Power Supply	Redundant Power Supplies
Power Supply Options	1600W
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware
Storage	Up to 24 drives